Key

 

Warranty Position Regulatory Position and Guidance Exemptions Does B4 still apply?
Green indicates we consider our position best practice and not in dispute Grey items cover the December 2018 Amendments, Approved Documents and MHCLG's own FAQs and advice notes Green indicates that the item IS exempt from Regulation 7(2), in accordance with Regulation 7(3) Green indicates that B4 still applies, and refers to relevant parts
Yellow indicates our position has the potential to be subjective   Red indicates that the item is NOT exempt. Refer to Regulation 7(3) Red shows that B4 no longer applies

 

Warranty Position

Requirement: A mid-pane blind is neither the frame nor the glass, nor a component part of either of these, so it is not exempt. Therefore the mid pane blind would need to combustibility class A2-s1,d0 or better, alternatively the insulated glass unit including the mid pane blind could be tested as a ‘product’ and achieve a combustibility classification of A2-s1, d0 or better.

Is the position indisputable? This may not be the view of all organisations.

December 2018 Amendment

Section 2 Reference: 2(6)(a)(iii).

Reference titles: Any windows and doors in the wall.


Approved Document

Reference title(s): Section 10.15(d).

References: Window frames and glass (including laminated glass) are exempted from regulation 7(2).


MHCLG FAQS / Advice Notes

Reference: Section 9.

Reference title(s): Window frames are exempted from the requirements of regulation 7(2) under the provision of regulation 7(3). Conventional curtain walls consisting of mullions, transoms and glazing can be considered as a window frame.

Exemptions

Is the item exempt from Regulation 7(2), in accordance with Regulation 7(3)?: Yes.

References: None.

Statement: None.

If exempt, are there any restrictions on the use of the system, component or material given in the guidance in ADB vol 2: None.

Does B4 still apply?

Yes: Reference: B4-(1)

For guidance on using this resource, please click here.

Disclaimer: The information in this document is believed to be correct in light of information currently available and at the time of publication but is not guaranteed. Neither LABC Warranty nor its agents can accept responsibility in respect of the contents or any events arising from the use of the information contained within this site. The guidance provided does not replace the reader’s professional judgement and any construction project should comply with the relevant Building Regulations or applicable technical standards. For the most up to date LABC Warranty technical guidance please refer to your Risk Management Surveyor and the latest version of the LABC Warranty Technical Manual.